Blind Spot Angles Morts Truck Sticker

These French Blind spot Stickers also know as Angles Morts Stickers are mandatory in France from the 1st of January 2021. From this date, all vehicles above 3.5 tonnes are required to display these stickers on the vehicles such as heavy goods vehicles, trucks, lorries, buses, coaches etc. See images 2 and 3 for placement examples. Trucks, Lorries and Tractor Units: On trucks and tractor units, the stickers must be installed on both sides of the vehicle and on the rear. On both sides, the stickers must be applied on the front of the cab, at a height between 0.9 and 1.5 metres from the ground. The sticker on the rear must be applied to the right hand side of the truck or tractor unit. This sticker must also be applied at a height between 0.9 and 1.5 metres from the ground. Trailers and semi-trailers: Stickers must also be applied to trailers and semi-trailers. On the rear of the trailer, the sticker must be applied on the right-hand side with a height between 0.9 and 1.5 metres. In addition, the stickers must also be applied on each side. On the body, this must be done within the first metre (at a height of 0.9 - 1.5 metres). For the trailers, the stickers must be applied on both sides within the first metre behind the fifth wheel (at a height of 0.9 - 1.5 metres). Exceptions: There are a number of exceptions to the rule. This applies to vehicles where it is  impossible to apply the stickers to the required areas on the vehicle. In this scenario, the stickers should be placed at the nearest  height possible, as long as it falls within the 2.10 metre limit. Some examples of vehicles where the stickers may be applied in other places are car transporters, tractor units for trailers, container chassis, platform vehicles, tank vehicles, adjustable arms for dump truck and dollies. It is not possible to affix the markings on the rear of the vehicle on these vehicles, therefore the sticker may be affixed in a position compatible with the characteristics of the vehicle. Vehicles where it is structurally impossible to apply the stickers to the side and / or rear are exempt from the blind spot sticker scheme.

• Size 250 x 170mm
• Glossy Finish
• Laminated
• Waterproof
• Self Adhesive
• Easy to Clean
• Easy to Apply

After clicking on 'Buy Now' button, you will be redirected to our shopping website Steekaz.com, where you can purchase this product.

Vehicle sticker replacement for registered electrical contractors.

• Size 200 x 150mm (A5)
• Glossy Finish
• Laminated
• Waterproof
• Self Adhesive
• Easy to Clean
• Easy to Apply

After clicking on 'Buy Now' button, you will be redirected to our shopping website Steekaz.com, where you can purchase this product.